Dear Sir/Madam,
Our current requirements are for the following sections:-
PSF150 – Material is to be 6061 T6 or 6005a T5 aluminium.
5.85 m long lengths
Minimum Run Quantities: 64 or 80 lengths (multiples of 16)
Price in: “Mill Finish” and also
“EPOXY Powder Coat” – must be epoxy (anti-graffiti type) powder coat to colour as specified on drawings i.e.
Powder-coat colour: Notre Dame grey, RGB 97-102-105
Delivery: Price F.O.B at nearest major Commercial Container Shipping Wharf
Pack Quantities: in Packs of 16 lengths (or 32 lengths if instructed to pack in packs of 32 as 16 packs is standard pack quantity)
Packaging: Packaged for export in crates
The Lengths need to be packed in crates of 16 or 32 lengths, any larger and they start to get too heavy to safely transport.
- Lengths cannot be allowed to touch each other once packed, so each length must either be wrapped in a protective layer such as cardboard, or have sheets placed between every length
- Once the 16 or 32 length stack is assembled they must be wrapped in a protective sheet.
- Crate to be constructed from treated wood, suitable for international shipping.
- Bearers have a notch in them to allow for strapping.
- Load cannot be allowed to pass through Lengths, bearers running down the side of the crate are there to transmit load from the top of the crate down to the bottom skid.
- Length of Crate cannot exceed 6 meters so as to allow container loading.