Details

Enquiry for the Coil Coating Equipment
The Coater is to be designed to apply a precisely metered amount of coating to both sides of the strip simultaneously.
The General Line Specifications are as below
Line Speed Max. 75MPM, Min. 15MPM
Strip Material Carbon Steel and Aluminum
Strip Width Max. 1370 mm; Min. 700 mm
Strip Tension Unconfirmed
Coating Material Finish Top: Polyester, Silicon Modified Polyester, Acrylic, Plastisol Back Epoxy, Polyester, Alkyd
Coating Paint Thickness & Tolerance is 5 to 50 micron meter Plus Minus1.25 micrometer; 50 to 100 micron meter Plus Minus2.25 micrometer; 100 to 500 micron meter Plus Minus 5.00 micrometer
Passing Height to existing Oven Aperture is 1740mm
Max and Min Ambient Temperature (for HPU Design)is Unconfirmed
Max and Min Ambient Humidity (for HPU Design)is Unconfirmed
Cooling Water Requirements is Not Required
Enquiry for the Electrostatic Blade Coating Equipment for Coils
The Electrostatic Oilier Coater is to be designed to apply a Uniform Coating of Electrically Resistive fluid such as oil to a both sides of the strip simultaneously. The General Line Specifications are as below
1. LINE AND PROCESS SPECIFICATIONS
Line Name: Skin Pass Line
Product Steel CRCA
Strip Speed: Max. 600 MPA, Mini. 30MPA
Strip Width: Max. 1650 mm, Min 600 mm
Strip Thickness: Max. 2.00 mm, Min. 0.24 mm
Voltage 415 Volts 3 Phase 50Hz, 220 Volts 1 Phase 50Hz ( Control), 24 Volts DC (PLC I/O )
2. COATING MATERIAL SPECIFICATIONS
Coated Surface: Top / bottom or Both side
Coating Material Rust Preventive
Film Weight 0.3 To 2.1 G/M2 (200 To 2100 mg/ m2) Per Side
Oil Coating Accuracy Plus Minus, 10 percentage
A Four Liter sample of each coating material will have to be submitted to CFG for testing and approval.

Other buy information