We are looking for the following equipments.
We are leading manufacturers of Aluminium Extrusions / Profiles & Auto Components etc. with a capacity of 14400 Tns Per year in India since 1980 and serving to leading world-class organization & Multinational Companies & the demand is increasing day by day.
We are looking for following equipments.
I) Bauxite Calcinations: High grade Bauxite Calcinations process and equipment to make calcined Bauxite for refractory (It is being used for Refractory Industry). Rotary kiln for Bauxite calcinations for refractory industries. The Klin after burning the lime stone and converted lime should have 95 to 96% Calcium Oxide (Cao). The details asked are as follows
Capacity 26000 tons per year in 3 shifts, 330 days
Bauxite of different grade - 45 to 51%
Raw material size 20 mm to 50 mm
calcinations temp. 1300-1400 c
Fuel Furnace oil for start up
Petroleum coke main Fuel
Water content Moisture up to 3%
Loss on ignition 30%
(water content)
The load is 2500KW max.demand 2400 kw.
Equipment for e.g.
1) Feeding hopper, belt, conveyor, hammer mill
2) Rotary kilns with suitable cooler system with Gear box tyres, calcinations sections firing system etc.
3) scrubber, centrifugal fan with water pump
4) Ball mill
5) Crusher, Vibrating Screen, Jaw & roll crusher
6) EOT Crane 20 tonne
7) Arc furnace nose tilting type (2000 kva)
8) High intensity magnet, magnetic separator
9) Dust collecting unit
10) Gyratory cone crusher
11) Pollution control equipment
12) Packing, forwarding, duties, insurance, handling, engineering, know how, erection and commissioning etc.
II) We are looking for - Hydrated Lime
9000MT/PA single shift 300 working days.
Lime comes out of the lime klin it is Hydratedlime. base is lime stone.
Power is 257 kwh per day. 40kw connected load. maximum load 32kw.
process and equipment for e.g.
1) Vertical Shaft Kilns with accessores
2) Jaw Crusher
3) Hydrator
4) Three tier screen Classifier with bag filters
5) Weighing and packing equipment
6) Quality control instruments
7) Material handling equipment
III) We are looking for - Iron Ore - process and equipment for
The plant is for 500000 MT per year capacity. (300 working days) .
Iron Ore - haematite/ Magnetite
500KW per day 100KV connected Load. Max. load at 90KW.
Processing Equipment for e.g.
1) Bulldozers
2) Loader cum excavators
3) Compressor
4) Jack hammer and accessories
5) Dumpers
6) Pumps
7) Weight bridges including installation
8) Trolleys
9) Mobile crane
10) Diamond drill, machine with pumps & accessories
11) Survey equipment
12) Mobile workshop
13) Ventilation fans with motor
14) Road roller
15) Crushers
16) Hammer mill
17) Mechanical screening plant
18) Material handling equipment
19) Washing tanks
20) Rake classifier
21) Dorr thickener
22) Misc. equipments
IV) We are looking for 67 MW Power capacity (total capacity 250 MW), for which, we need 4 Turbine, Boiler, crushing etc. (Fuel is COAL).
And there should be minimum wastage, higher productivity, maximum flexibility in operation and adequate standby provision wherever necessary etc.
The above is only rough idea, which you can alter according to the standards.
We request you to please send us your most & best lowest quotation / offer on Nhava Sheva Port, CIF, Mumbai, India with commercial terms & conditions. Also, send us product catalogue / process, capacity etc.details. Also, let us know your customers name & where it is working etc so as to review it and proceed accordingly.
Awaiting your early reply by return so as to proceed accordingly.
With regards,