We are interested to buy Aluminum Ingot, grade AL-95. If you are accepting 100% IRRECOVABLE CONFIRM L/C AT SIGHT, and the OPENING BANK will be any internationally recognized bank of Pakistan, then business through you is possible. We hope that you will think about that. We need confirmation from your side that you can supply on L/c.
We are enclosing specification and other details for your consideration. Kindly quote your best CNF Karachi including our commission. That is a tender base inquiry of cooperate sector of Pakistan. Specification is as follows:
GRADE: AL-95
Al 95 Min
Cu 1.5 Max
Zn 1.5 Max
Mg 1.0 Max
Si 1.0 Max
Mn 1.0 Max
Pb 0.15 Max
Sn 0.10 Max
Pb and Sn are harmful impurities
QTY = 636 MT
SIZE & SHAPE
Mass of Aluminum Ingots shall be 1 to 2 kg, which should be in the shape of notch / plain bar ingot.
Size of each piece should meet the Length 300 – 400mm
Breath not more than 50mm
Height not more than 50mm
QUALITY
Material should be uniform quality, oxygen deprived and free from dross, slag, hollow shells and other harmful contaminations.
Surface quality of the material shall be determined visually.
Material shall be supplied along with mill test certificate.
SECOND INQUIRYCASE NO. 84022/CP-4ALUMINIUMGRADE: AL-89%
Al 89 Min
Cu 3.0 Max
Zn 0.8 Max
Mg -
Si 1.0 Max
Mn 3.0 Max
Pb 0.2 Max
Sn 0.1 Max
Pb and Sn are harmful impurities
Al 89 grade will be used only for production of steel grade of commercial quality and only when de-oxidation with Fe – Si and / or Fe – Mn is being a domed.
QTY = 10 MT
Best regards
Asim Nazir