Company:EASTFIELD INTERNATIONAL INDUSTRIAL LIMITED
Location: China
Contact Person:eastfield
Post Time:2010/9/22
Free Member
EASTFIELD INTERNATIONAL INDUSTRIAL LIMITED
Tel:8676981162362
Fax:8676984415199
Add:2nd industrial zone of yongqing, daojiao, dongguan, Guangdong, china
Post Code::513000
E-mail:eastfieldmachine@163.com
Detail Information
materials to cut:
Rigid PVC foams and similar materials
Description
This special bandsaw allows for the sawing of rigid PVC foam blocks into various layer thicknesses. The rigid foam block is put onto a vacuum table which is sliding silently on hardened and ground steel bands. The drive is realized via rack and an adjustable table drive.
Depending on the length of the vacuum table the respective number of blocks can be loaded onto the table. The sawn layer has to be taken off after each cut. In order to facilitate this procedure, it is possible to program a respective waiting time in the range of 0,5 and 10 seconds after the cut.
technical data
HHHS-1250RI
HHHS-/1650RI
customer-built
max cutting height
1200mm
cutting width and length
1250W*2000L
1650W*3000L
total power
10.1kw
sawing thinkness
5MM~150mm
cutting tolerance
±2mm( accoding to the nature of the materials )
materials to cut:
Rigid PVC foams and similar materials
Description
This special bandsaw allows for the sawing of rigid PVC foam blocks into various layer thicknesses. The rigid foam block is put onto a vacuum table which is sliding silently on hardened and ground steel bands. The drive is realized via rack and an adjustable table drive.
Depending on the length of the vacuum table the respective number of blocks can be loaded onto the table. The sawn layer has to be taken off after each cut. In order to facilitate this procedure, it is possible to program a respective waiting time in the range of 0,5 and 10 seconds after the cut.
technical data
HHHS-1250RI
HHHS-/1650RI
customer-built
max cutting height
1200mm
cutting width and length
1250W*2000L
1650W*3000L
total power
10.1kw
sawing thinkness
5MM~150mm
cutting tolerance
±2mm( accoding to the nature of the materials )